VideoSecu 2 Heavy duty PA DJ Club Adjustable Height Satellite Speaker Stand Mount - Extends 26.5" to 47" (i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony, Yamaha, Pioneer and others) 1B7
Designed to accommodate satellite surround loudspeakers from most major manufacturers. Adjustable height for personal preference. Unsightly cables concealed via central hole in the provided brackets. Universal Compatibility with the majority of leading brands of surround loudspeakers, including Acoustic Energy, Sony, Bose and many others.
SANUS Adjustable Height Speaker Stand - Extends 28" to 38" - Holds Satellite & small Bookshelf Speakers (i.e. Bose, Harmon Kardon, Polk, JBL, KEF, Klipsch, Sony and others) - Set of 2 - Model: HTBS
The SANUS VuePoint HTBS satellite speaker stand is the perfect addition to any home theater. The stand is height-adjustable, so satellite speakers up to 3.5 lbs can be positioned 28 in to 38 in from the floor for a customized setup. It can be assembled in minutes using just a Phillips screwdriver. Each heavy-gauge steel pillar is offset for optimum sound and features an integrated wire channel for easy management. Includes top plate, L-shaped brackets and keyhole mount adapters to fit most small satellite speakers. Comes with 5-year manufacturer's warranty Speakers not included
Monoprice Satellite Speaker Floor Stand (Set of 2), Black
Manufacturer: Monoprice Inc.
Many small satellite speakers have ports on the back, which are designed to improve the bass response. For best sound response, it is usually recommended to mount these speakers about 1-2 feet away from the wall, to allow the ports to work properly. This speaker floor stand set is designed to let you mount your satellite speakers in an ideal location, away from a wall. The stands are height adjustable from about 26.8" to 43.3", allowing you to mount the speakers at your ear height when sitting. They can hold speakers weighing up to 5 lbs each. The brackets mount onto speakers with a standard 1/4" x 20 mounting screw or via a keyhole mount. The stand tubes are hollow so that the speaker wires can be hidden within.
SANUS BF31-B1 31" Speaker Stands for Bookshelf Speakers up to 20 lbs - Black - Set of 2
The SANUS Basic Series BF31 is a 31-inch black speaker stand for small bookshelf speakers up to 20 lbs. A solid, energy-absorbing MDF pillar supports a 5-inch by 5-inch top plate with neoprene speaker isolation pads for superior acoustic quality. ABS push-in carpet spikes add stability, and a built-in concealed wire path hides speaker cables for a clean and organized appearance in any room. This product is sold as a pair.
Mount-It! MI-1214 Speaker Stands for Home Theater 5.1 Channel Surround Sound System Satellite Speaker Stands Mounts, Rear and Front, 2 Pairs, 10 lb Capacity, Black
Manufacturer: Transform Partners LLC
MI-1214 floor-standing speaker stands allows you to install your home theater satellite speakers at an ideal location, away from a wall. The stands have a sleek, compact, low base design that will fit into any location, and it will enhance the appearance of your home. They are great for any room, especially a home cinema or living room. Simple to set up and easy to fine-tune, these speaker stands make a good addition to almost any home stereo or surround sound setup. Many small satellite speakers have ports on the back, which are designed to improve the bass response. For best sound response, it is usually recommended to mount these speakers about 1-2 feet away from the wall, to allow the ports to work properly. MI-1214 are designed with a heavy-gauge cast iron base to hold any satellite speakers with a single thread or a keyhole fitting. Built-in cable management discreetly routes cables for a clean installation. The stands are height adjustable from about 26.8" to 43.3", allowing you to mount the speakers at your ear height when sitting. They can hold speakers weighing up to 5 lbs each. Please note, cable pass through the pole will not be possible with speakers that have special connectors. These special connectors should be connected to the cable only after the cable has run through the pole. Please note, these stands are not compatible with speakers with mounting holes located at the bottom, top or left/right side of the speaker. The mounting holes must be on the back of the speaker to be compatible with this stand.
Mount-it, Satellite-it. Mount-its, MI-1210 Satellite speaker mounts is our newest mount to hit the market. These dual, Universal, Adjustable Surround Sound Speaker Stands are the next level entertainment stands for your home. The MI-1210 stands have a sleek, compact, low base design that will fit into any location, and it will enhance the appearance of your home. Sleek Speaker Stands. This floor-standing, dual speaker stand is attractive with its sleek design that is made to hold your satellite speakers, and to enhance your sound quality of your speakers as well as the appearance of your room. These speaker stands are great for any room, especially a cinema or living room. Construction. The MI-1210 are designed with a heavy-gauge steel base to hold any satellite speakers with a single thread or a keyhole fitting. With the weight of your speaker and this speaker mount you can enjoy your surround sound without the eye sore of wires with the integrated cable management. Features. This MI-1210 Satellite Speaker Stands will fit just about any speaker that uses a 1/4-Inch x 20 mounting screws or keyhole mount, which are similar to satellite speakers with the weight capacity of 5 pounds. Also, these dual speaker mounts are height adjustable to optimize your surround sound within your room. These speakers' mounts can be adjusted from 26.8" to 43.3" and they come with a comprehensive mounting kit.
BIG JAMBOX turns any phone, tablet or mobile device into a portable, hi-fi sound system. Now you can play music, movies, and games and fill even the largest spaces with sound. Precision-tuned drivers and dual passive bass radiators work in concert to produce amazingly clear, full audio at any volume.