PCT 1-PORT BI-DIRECTIONAL CABLE TV HDTV AMPLIFIER SIGNAL BOOSTER WITH PASSIVE RETURN PATH
If you are having cable TV picture problems this may be the product for you. It is NOT compatible with satellite TV, and will actually block satellite reception - so do not order it if you have satellite TV. This product will improve your cable TV picture and reduce pixilation, snow, and audio drop-outs that are caused by a weak signal level. It is compatible with all cable TV systems and services. You may or may not notice a difference in cable modem speed when using the amplifier. A number of factors influence cable modem speed, and there is no guarantee a booster will improve modem performance. If you are boosting an HDTV antenna signal, you should get the best HD antenna you can afford BEFORE using a booster. This signal amplifier IS NOT a substitute for a good antenna. If you are using an indoor antenna or are having HD reception problems with just a single TV attached to your outdoor antenna, this product will likely not improve your reception. If you are uncertain if this product will work for you, contact your retailer before purchasing.
This amplifier provides 8 ports for multiple TV sets, cable boxes, or cable modems. It boosts signal strength by more than double (+4dB), Improves Analog, Digital & HDTV Picture Quality, and Improves UHF/VHF/FM Antenna Reception! This amplifier provides the exact same OR BETTER specs as the ones that other sellers are selling for much higher prices. PCT amplifiers are designed to fit into smaller spaces, while providing the FULL performance of larger sized amplifiers.
2-Port Bi-Directional Cable TV HDTV Amplifier Splitter Signal Booster with Passive Return Path
PCT's miniature MA2 drop amplifier series has improved performance and ultra-low noise amplification of broadband signals for subscriber drop installations. The MA2 series provides better performance, enhanced shielding protection, and IEEE B3 6kV, 3000 amp combination wave surge withstand on all ports for superior lightning protection. All F ports also include PCT patented Digital Seizure Mechanism (DSM) for superior center conductor retention, electrical performance, and additional protection against transient surges.
Fosmon HD1832 Intelligent 5-Port HDMI Switch with IR Remote and AC Adapter Supports 3D, Black
Manufacturer: Fosmon Distributing, LLC
Ran out of HDMI ports on your HDTV/monitor/projector? Want to reduce the mess of cables connected to it? Fosmon's Fosmon 5x1 HDMI Intelligent Switch with Infrared Remote Control will take care of these problems. It has 5 HDMI input sources to switch from at ease with the infrared remote control. A button to manually switch between the 5 sources is also built-in. HDMI Supported Features Up to 1080p, HDCP 1.0/1.1, 12-bit Deep Color, 3D, and uncompressed/compressed audio formats are some of the newer HDMI features supported on this switch. Optionally Powered from Connected Devices No power adapter is necessary to make this switch work, as long as the connected devices supply sufficient power. For devices that do not supply enough power (or supply continuous power in standby) the included power adapter is recommended. Infrared Blaster and Remote Control The included infrared blaster and remote control allows the switch to be controlled from a distance. Easily switch between HD devices without having to get up from your seat. Gold-Plated Ports The 24K gold-plated ports resists corrosion and reduces tarnish. Level VI Energy Efficiency Power Adapter The Department of Energy (DoE) published a more stringent energy standard that went into effect in 2016, and the adapter meets the required standards. Level VI is currently the highest energy efficiency standard. Features and Specifications â€¢5 HDMI inputs / 1 HDMI output â€¢Supports up to 1080p resolutions â€¢Supports 12-bit Deep color per channel; maximum of 36-bits across all channels â€¢Supports 3D devices â€¢Supports HDCP â€¢Supports audio formats such as DTS-HD, Dolby TrueHD, LPCM7.1, PCM, DTS, Dolby Digital AC3 â€¢24k gold-plated ports â€¢IR Remote Control and Power Supply included NOTE -Devices that require HDCP 2.2 or higher may be incompatible (e.g. Apple TV 4) -Fire Stick may be incompatible
OREI HD-102 1x2 1 Port HDMI Powered Splitter Ver 1.3 Certified for Full HD 1080P & 3D Support (One Input To Two Outputs)
Manufacturer: Orei Products
OREI HD-102 1x2 HDMI Splitter This reliable splitter will take any HDMI signal (rev 1.3b) and duplicate the signal, sending the same high definition signal to 2 displays simultaneously. Product Features: - Excellent Quality - The heavy-duty cool metal enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation. - 2 x HDMI Outputs supporting up to v1.3b and 1440p - 1 x HDMI Input supporting up to v1.3b and 1440p - Supported Audio: LPCM,Dolby-AC3, DTS7.1, DSD/Dolby TrueHD/DTS-HD master audio - Essentially all available audio options are supported - Video Format:Deep Color 480i/ 576i/ 480p/ 576p/ 720p/ 1080i/ 1080P/ 1440i/ 1440p - EIDI Duration: 6 seconds Specification: - Product Type: HDMI 1x2 Splitter - Interface Type: 1 HDMI in,2 HDMI out - Color: Black - Power Supply: DC 5V - Dimension: 10 X 6.1 X 2.6 cm - Weight: 0.09KG Package included: - HDMI 1x2 Splitter x 1 - 5V AC Adapter x 1 - User Manual x 1HDCP COMPLIANT - WILL NOT BYPASS HDCP SIGNAL
OREI HD-108 High Quality HDMI Splitter 1 x 8, Support 3D, you can enjoy a luxury of simultaneous displays at the most economical wholesale price just here! This HDMI splitter enables you to have 8 simultaneously displays from 1 HDMI source. This is ideal to use in places where several aspects have to be monitored or on occasions when several people need to look at the display in different angles.